### Faster than the speed of binary search

[Updated 2006-10-28, new text and code at the end.] Everybody (at least everybody competent enough to be worth mentioning) know how to search in sorted array with the binary search algorithm. But everybody (or almost everybody) thinks that this is the fastest approach to searching. Is everybody (or almost everybody) correct regarding that topic? It depends. On general, the answer is true - binary search is fastest. But that only holds if we know nothing about the data stored in the array - in other words, if we pretend that it is random (but sorted, of course). Want an example? Take an array [1..99] of byte. Fill it with numbers in the range 1..100 but leave (random) one out. Use each number only once. Sort it. You'll get an array with first N numbers in the same position as the array index ( Are there more general guidelines to speeding up a binary search. Yes, it's quite simple - we only have to be able to guess the position of the value we're searching for better than with the "it's somewhere in the middle" approach. In a way, that's exactly what we did in the example above. This approach is very simple to use if data in the array is distributed uniformly. In that case, we can take the value at low and high end of the interval (not the indices as in the binary search, but values at those indices) and use a linear interpolation to guess a possible position of the value. Something similar happend to me last week. I was solving some DVB-related problem and built an array of video fragments (video PES, if you know anything about the DVB internals) in a video file (actually I only stored file offset for each fragment). Later, I needed to find (many times) a fragment closest to some file offset (every time a different offset). Of course, I could use a simple binary search, but it was such a nice opportunity to try out a better approach and run some tests ... For test data I used a small, 40 MB video file. There were 51737 entries in the array and the code executed 3128 searches. With standard bisection, the code did 15.45 rounds through the bisection loop per search (on average). With interpolated search, this number was decreased to 4.13 rounds per search. That's better by a factor 3.7! And in the real life, the file will be some 50x larger - around 2 GB - and difference will be even bigger. The number of rounds/number of searches distribution for both approaches:
We can see that standard binary search needed 16 rounds for majority of the searches and almost no searches were completed in less than 15 rounds. On the other hand, interpolated binary search shows almost gaussian distribution from 2 to 6 rounds. But as the code is more complicated (see below), the total speedup was not that impressive, only somewhere around 1.6 times. Still, it was a personal satisfaction to see the theoretically better code run faster in reality, too :) function TGpTSPIDIndex.Find(transportStreamOffset: int64; var index: integer): boolean;
[Updated 2006-10-28] While thinking on the comment posted by the anonymous I looked at the code from a new view and suddenly I realized that I'm an idiot. The 'while' condition in the bisection loop in my version should not differ from the condition in standard binary search! When I put this right, I could suddenly remove all extra tests at the beginning as they were no longer needed. New code (tested to work the same as the old code and as the standard binary search - at least on my data) is posted below. A word of warning: all this works only if there are no repetitive elements in the sorted array! If this condition is not satisfied, you'll soon get a 'division by 0' exception in the calculation of the weighted midpoint. function TGpTSPIDIndex.Find(transportStreamOffset: int64; var index: integer): boolean; |

3Comments:Binary searchs are complete searches, where as your routine is a subset search. If you can be 100% sure that the data you seek will always be in that subset, it makes no sense to search elsewhere.

If you have ANY doubt at all, stick with the complete search. IN fact, if you fail, you might want to fall back to complete search anyways just to make sure you don't have faulty assumption about your dataset.

Data can be notioriously tricky that way.

Why do you think it is a subset search? It just selects a midpoint that is "slightly" off the center.

But in general I do agree. However, tricks like this are a great way to quickly narrow down the search range and then use a binary search to find the data.

hy!

have you to optimize this code?

the most important things is to find if a value in "in the list", when not insert with with a new rangeitem or "expand" an already exists range.

unit Unit_Int64List;

interface

uses

Classes;

type

TInt64RangeItem = class

private

public

StartIndex: Int64;

Start: Int64;

Stop: Int64;

class function NewInstance: TObject; override;

procedure FreeInstance; override;

protected

constructor Create(const _Start: Int64; const _Stop: Int64);

published

end;

type

TInt64List = class

private

FList: TList;

FUpdateCount: Integer;

FCount: Int64;

function GetCount: Int64;

function GetRangeCount: Integer;

function FindRangeIndex(const Value: Int64; var Index: Integer): Boolean;

procedure CalcStartIndex;

function GetRange(Index: Integer): TInt64RangeItem;

public

constructor Create;

destructor Destroy; override;

function Add(const Value: Int64): Int64;

procedure DeleteRange(const Index: Integer);

function Find(const Value: Int64; var Index: Int64): Boolean;

function FindGetPath(const Value: Int64): String;

function IndexOf(const Value: Int64): Int64;

procedure Clear;

procedure Compact(const ReCalcStartIndex: Boolean = False);

procedure SaveToStream(F: TStream);

procedure LoadFromStream(F: TStream);

//

property Count: Int64 read GetCount;

property RangeCount: Integer read GetRangeCount;

property Ranges[Index: Integer]: TInt64RangeItem read GetRange;

end;

implementation

uses

SysUtils, Unit_Utils;

const

TIntegerSize = SizeOf(Integer);

// -----------------------------------------------------------------------------

class function TInt64RangeItem.NewInstance: TObject;

type

PClass = ^TClass;

var

P: Pointer;

begin

GetMem(P, Self.InstanceSize); //Allocate Memory for this object

Result := TObject(P); // Set the result

InitInstance(P); // Initialise the Instance

PClass(Result)^ := Self; // Init VMT, don't init fields.

end;

procedure TInt64RangeItem.FreeInstance;

begin

CleanupInstance; // Clean Up

FreeMem(Pointer(Self), Self.InstanceSize); // Free Memeory

end;

constructor TInt64RangeItem.Create(const _Start: Int64; const _Stop: Int64);

begin

inherited Create;

Start := _Start;

Stop := _Stop;

end;

// -----------------------------------------------------------------------------

constructor TInt64List.Create;

begin

inherited Create;

FList := TList.Create;

FUpdateCount := 0;

FCount := 0;

end;

destructor TInt64List.Destroy;

begin

Clear;

FreeAndNil(FList);

inherited Destroy;

end;

function TInt64List.Add(const Value: Int64): Int64;

var

R: TInt64RangeItem;

RangePos: Integer;

begin

if (FindRangeIndex(Value, RangePos) = True) then

begin

R := FList.List^[RangePos];

Result := R.StartIndex + (Value - R.Start);

end else

begin

Result := 0;

if (FList.Count > 0) then

begin

if (RangePos < FList.Count) then

begin

R := FList.List^[RangePos];

if ((Value+1) = R.Start) then

R.Start := Value

else

if (RangePos > 0) then

begin

R := FList.List^[RangePos-1];

if ((R.Stop+1) = Value) then

R.Stop := Value

else

FList.Insert(RangePos, TInt64RangeItem.Create(Value, Value));

end else

FList.Insert(0, TInt64RangeItem.Create(Value, Value));

end else

begin

R := FList.List^[RangePos-1];

if ((R.Stop+1) = Value) then

R.Stop := Value

else

FList.Add(TInt64RangeItem.Create(Value, Value));

end;

end else

FList.Add(TInt64RangeItem.Create(Value, Value));

Inc(FCount);

end;

end;

procedure TInt64List.DeleteRange(const Index: Integer);

var

R: TInt64RangeItem;

begin

if (Index >= 0 ) and

(Index < FList.Count) then

begin

R := FList.List^[Index];

FList.Delete(Index);

FreeAndNil(R);

end;

end;

function TInt64List.FindRangeIndex(const Value: Int64; var Index: Integer): Boolean;

var

Low,High,Mid: Integer;

RangeCursor: TInt64RangeItem;

begin

Low := 0;

High := FList.Count - 1;

Mid := 0;

Result := False;

while not Result and ( Low <= High ) do

begin

Mid := (Low + High) shr 1;

RangeCursor := FList.List^[Mid];

if (RangeCursor.Start <= Value) and (Value <= RangeCursor.Stop) then

Result := True

else

if (Value < RangeCursor.Start) then High := Mid - 1 else

if (Value > RangeCursor.Stop ) then Low := Mid + 1;

end;

if Result then Index := Mid

else Index := Low;

end;

function TInt64List.Find(const Value: Int64; var Index: Int64): Boolean;

var

R: TInt64RangeItem;

RangePos: Integer;

begin

Index := -1;

Result := FindRangeIndex(Value, RangePos);

if (Result = True) then

begin

R := FList.List^[RangePos];

Index := R.StartIndex + (Value - R.Start);

end;

end;

function TInt64List.FindGetPath(const Value: Int64): String;

var

Low,High,Mid: Int64;

RangeCursor: TInt64RangeItem;

F: Boolean;

V: Int64;

begin

Result := '';

// Find range index ----------------------------------------------------------

F := False;

High := FList.Count - 1;

Low := 0;

Mid := 0;

while not F and ( Low <= High ) do

begin

Mid := (Low + High) div 2;

RangeCursor := FList.List^[Mid];

if (RangeCursor.Start <= Value) and (Value <= RangeCursor.Stop) then

begin

Result := Result + '11';

F := True;

end else

if (Value < RangeCursor.Start) then

begin

Result := Result + '10';

High := Mid - 1;

end else

if (Value > RangeCursor.Stop ) then

begin

Result := Result + '01';

Low := Mid + 1;

end;

end;

if (F = True) then

begin

// Find index IN range -----------------------------------------------------

Result := Result + '|';

F := False;

Low := 0;

High := TInt64RangeItem(FList.List^[Mid]).Stop - TInt64RangeItem(FList.List^[Mid]).Start;

while not F and ( Low <= High ) do

begin

Mid := (Low + High) div 2;

V := TInt64RangeItem(FList.List^[Mid]).Start + Mid;

if (Value = V) then

begin

Result := Result + '11';

F := True;

end else

if (Value < V) then

begin

Result := Result + '10';

High := Mid - 1;

end else

if (Value > V) then

begin

Result := Result + '01';

Low := Mid + 1;

end;

end;

end else

Result := '|';

end;

function TInt64List.IndexOf(const Value: Int64): Int64;

begin

Find(Value, Result);

end;

procedure TInt64List.Clear;

var

I: Integer;

begin

if (FList.Count > 0) then

for I := (FList.Count-1) downto 0 do

begin

TInt64RangeItem(FList.List^[I]).Free;

//Dispose(FList.List^[I]);

FList.Delete(I);

end;

FList.Pack;

FList.Clear;

end;

procedure TInt64List.Compact(const ReCalcStartIndex: Boolean = False);

var

I: Integer;

C,N: TInt64RangeItem;

begin

if (FList.Count > 1) then

begin

I := 0;

repeat

C := TInt64RangeItem(FList.List^[I ]);

N := TInt64RangeItem(FList.List^[I+1]);

//

if (N.Start <= (C.Stop+1)) then

begin

if (N.Start <= C.Start) then

C.Start := N.Start;

C.Stop := N.Stop;

DeleteRange(I+1);

end else

Inc(I);

until (I = (FList.Count-1));

if (RecalcStartIndex = True) then

CalcStartIndex;

end;

end;

function TInt64List.GetCount: Int64;

begin

Result := FCount;

end;

function TInt64List.GetRangeCount: Integer;

begin

Result := FList.Count;

end;

procedure TInt64List.CalcStartIndex;

var

I: Integer;

R: TInt64RangeItem;

begin

FCount := 0;

if (FList.Count > 0) then

for I := 0 to (FList.Count-1) do

begin

R := FList.List^[I];

R.StartIndex := FCount;

Inc(FCount, (R.Stop - R.Start + 1));

end;

end;

function TInt64List.GetRange(Index: Integer): TInt64RangeItem;

begin

Result := nil;

if (0 <= Index) and (Index < FList.Count) then

Result := FList.List^[Index];

end;

procedure TInt64List.SaveToStream(F: TStream);

var

I: Integer;

R: TInt64RangeItem;

V: packed record

V1: Int64; // +8

V2: Int64; // +8

end;

M: TMemoryStream;

procedure FlushBuffer;

begin

M.Seek(0,0);

F.CopyFrom(M, M.Size);

M.Size := 0;

end;

begin

Compact;

if (FList.Count > 0) then

begin

M := TMemoryStream.Create;

for I := 0 to (FList.Count-1) do

begin

R := FList.List^[I];

V.V1 := R.Start;

V.V2 := R.Stop;

M.Write(V, 16);

if (M.Size > 65536) then

FlushBuffer;

end;

FlushBuffer;

FreeAndNil(M);

end;

end;

procedure TInt64List.LoadFromStream(F: TStream);

var

I,C: Integer;

V: packed record

V1: Int64; // +8

V2: Int64; // +8

end;

M: TMemoryStream;

begin

Clear;

M := TMemoryStream.Create;

M.Size := F.Size;

M.CopyFrom(F, F.Size);

M.Seek(0,0);

C := (M.Size div 16);

if (C > 0) then

begin

FList.Capacity := C;

for I := 1 to C do

begin

M.Read(V, 16);

FList.Add(TInt64RangeItem.Create(V.V1, V.V2));

end;

end;

FreeAndNil(M);

CalcStartIndex;

end;

end.

thx:

xcluster

## Post a Comment

## Links to this post:

Create a Link

<< Home